Re: speedo not working

[Scott Richardson <srr4582@home.com>]

If that doesn't fix it then there probably isn't enough force in the
little spring to push the needle back down. This happened to me when I
took apart my cluster to fix my odometer. Try positioning the needle a
little past that tiny bar before you actually push it on. Then just bend
the needle out a little bit and pull it over the bar. That should give
it enough force to pull it all the way back.

Scott Richardson
'86 8V Scirocco

Richard Pizzulo wrote:
> 
> probably just the speedo cable isn't connected all the way as the tach is vacuem controlled I believe.  anyways just reach up under your panel and feel for the speedo cable and push it in, i am pretty sure that you don't need to pull the guages back out...this is how I did mine once.
> 
> -=Rick
> 84' 8V Wolfs
> Mobile, AL
> 
> doug c. wrote:
> 
> > so i got my cluster back in with my new guage faces (which look awesome...thanks brett!!!!!)...the only problem is my speedometer doesn't work...the odometer does however...what should i be looking for when i go back in there...could it be the speedo cable isn't on fully, or would this cause the odometer to not work too?...could it be i didn't press the needle on the shaft fully?...the speedometer did work before i took the cluster apart...it's an 88 16v rocco
> > TIA
> > -doug
> > ______________________________________________
> > FREE Personalized Email at Mail.com
> > Sign up at http://www.mail.com/?sr=signup
> >
> > --
> > Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> > "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> 
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org