Re: speedo not working

[Brett Van Sprewenburg <brett@netacc.net>]

>so i got my cluster back in with my new guage faces (which look 
>awesome...thanks brett!!!!!)...the only problem is my speedometer 
>doesn't work...the odometer does however...what should i be looking 
>for when i go back in there...could it be the speedo cable isn't on 
>fully, or would this cause the odometer to not work too?...could it 
>be i didn't press the needle on the shaft fully?...the speedometer 
>did work before i took the cluster apart...it's an 88 16v rocco
>TIA
>-doug


Yeah, seen this before.  reach back to the speedo cable again, and
push harder to seat it. :)  If that fails, pul the cable back out,
and reinsert after moving the car in gear a tiny bit to rotate the
speedo cable to a different position.

Thanks for the compliments! :)

==Brett

 \/  '84 Scirocco (ITB racer 2B) | "Hot VW's, take two home. They're small"
\/\/ '88 Scirocco 16v (Show), '85 Scirocco (Winter) | - brett@netacc.net

--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org