[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Multiple Questions.....
- Subject: Multiple Questions.....
- From: julie at menloparkrandd.com (julie@xxxxxxxxxxxxxxxxxx)
- Date: Fri Jul 27 11:55:58 2007
Great chart. Good find!
>-----Original Message-----
>From: Allyn [mailto:amalventano1@xxxxxxx]
>Sent: Friday, July 27, 2007 12:40 PM
>To: ''Chuck Blue'', ''Neptuno'', julie@xxxxxxxxxxxxxxxxxx, ''A Org, Scirocco''
>Subject: RE: Multiple Questions.....
>
>This page references a similar pump to ours:
>http://www.theoldone.com/components/fuelpumps/
>Note: CIS runs at 75 PSI
>
>HTH
>Al
>
>> -----Original Message-----
>> From: Chuck Blue [mailto:sukchew@xxxxxxxxxxxxxx]
>> Sent: Friday, July 27, 2007 12:28 PM
>> To: Neptuno; julie@xxxxxxxxxxxxxxxxxx; A Org, Scirocco
>> Subject: Re: Multiple Questions.....
>>
>> I don't know.A walpro pump is listed at 20 fla which is
>> basicly locked up.It operates on a 10amp circuit so it
>> probably is only drawing 2-3 amp on a normal load.I couldn't
>> fine a draw number on the Bosch pump.I would guess it is
>> probably about the same.
>> ole blue
>> ----- Original Message -----
>> From: Neptuno
>> To: Chuck Blue ; julie@xxxxxxxxxxxxxxxxxx ; A Org, Scirocco
>> Sent: Friday, July 27, 2007 10:01 AM
>> Subject: Re: Multiple Questions.....
>>
>>
>> Chuck,
>>
>> Stupid question, What is the proper amp draw?
>>
>> El Tony
>>
>> Chuck Blue <sukchew@xxxxxxxxxxxxxx> wrote:
>> Check the amp draw whenthe fp is running.That should tell
>> the story.
>> ole blue
>> ----- Original Message -----
>> From:
>> To: "A Org, Scirocco"
>> Sent: Friday, July 27, 2007 7:58 AM
>> Subject: Multiple Questions.....
>>
>>
>> > On the 85 8v:
>> > 1) I replaced the burned FP relay with a wire, fuse and
>> switch. The heavy
>> > wire does get real hot. Is the FP on the way out?
>> >
>> > 2) The door handle on the MKII is hard to remove. I got
>> the screw out but
>> > the handle does not slide. Any suggestions?
>> >
>> > On the MKI 16v
>> > 1) the motor is not generating a vac on crank, once it
>> starts top spin it
>> > moves really fast. I am going to check compression
>> tonight. Could the
>> > vales be hung up? If so, whats the remedy.
>> >
>> > 2) I got a set of rear disks from a MKII 16v for the
>> MKI. I cant seem to
>> > get the calipers to retract into the housings. Are they toast?
>> >
>> > Well thats enough for Friday. Its going to be a busy
>> weekend with the cars
>> > again.....
>> >
>> > _______________________________________________
>> > Scirocco-l mailing list
>> > Scirocco-l@xxxxxxxxxxxx
>> > http://neubayern.net/mailman/listinfo/scirocco-l
>> >
>> >
>> > --
>> > No virus found in this incoming message.
>> > Checked by AVG Free Edition.
>> > Version: 7.5.476 / Virus Database: 269.10.20/919 -
>> Release Date: 7/26/2007
>> > 9:56 AM
>> >
>> >
>>
>>
>> _______________________________________________
>> Scirocco-l mailing list
>> Scirocco-l@xxxxxxxxxxxx
>> http://neubayern.net/mailman/listinfo/scirocco-l
>>
>>
>>
>>
>>
>> --------------------------------------------------------------
>> ----------------
>> Building a website is a piece of cake.
>> Yahoo! Small Business gives you all the tools to get online.
>>
>>
>> --------------------------------------------------------------
>> ----------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.476 / Virus Database: 269.10.22/922 - Release
>> Date: 7/27/2007 6:08 AM
>> _______________________________________________
>> Scirocco-l mailing list
>> Scirocco-l@xxxxxxxxxxxx
>> http://neubayern.net/mailman/listinfo/scirocco-l
>
>