engine mounts and ugly vibration

[txrocco@sbcglobal.net (ATS - Patrick Bureau)]

radiator wise , on a 16v depends on ac or not I think the top hose is in a
different angle but same size 625mm.

loud ugly vibration? can you explain that one a little more (i.e: the whole
car shakes? or just the shifter handle vibrates?, or just the mirror? is it
a vibration or a shudder of the car while shifting?

what kind of mounts you have on the car? OEM, HD or Poly?

ATS - Patrick Bureau - txrocco@sbcglobal.net


=>-----Original Message-----
=>From: scirocco-l-admin@scirocco.org
=>[mailto:scirocco-l-admin@scirocco.org]On Behalf Of Hudin Lucian
=>Sent: Monday, April 21, 2003 8:02 AM
=>To: scirocco-l@scirocco.org
=>Subject: engine mounts and ugly vibration
=>
=>
=>hello list,
=>i finnaly took the car to a mechanic to a complete check of the engine,
=>he disassembled it completely, (it looks very nice btw ),
=>I had to change some things no big deal, almost everything was ok,
=>except for the engine mounts, all three of them. It's a 16v engine.
=>Now everything works fine, except :
=>
=>* under acceleration right after shifting in gear 1/2 a loud ugly
=>vibration
=>can be heared, this never happened before. The mechanic says the engine
=>mounts are new, so they are stiff. ???!!! . btw, the clutch disc was
=>replaced with
=>a brand new one (Sachs type).
=>
=>and can someone tell me the stock dimensions of the radiator ? The one
=>I have it's not an original one, and it looks much smaller (about 10-15 cm
=>shorter)
=>
=>thanks a lot
=>Luci
=>
=>www.scirocco.ro [soon...]
=>
=>
=>
=>_______________________________________________
=>Scirocco-l mailing list
=>Scirocco-l@scirocco.org
=>http://neubayern.net/mailman/listinfo/scirocco-l