[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Floppy flange was: Flange cap seals

Subject: Floppy flange was: Flange cap seals
From: tberk@mindspring.com (T Berk)
Date: Fri, 26 Jul 2002 01:38:54 -0700
References: <001201c233d1$3745d4e0$83481c43@futureworld>

> DEMETRIS RAPTIS wrote:
> 
> I replaced both flange seals on the FN tranny...

I was bolting the axles back onto the inner CV and noticed the crank
side one flopped around a lot. The drivers' side one was tight.

How much and what do I need to replace to fix this AND is it a good time
to consider retrofit to 100 mm everything?

The future plans included 16v steering knuckles any way so...

tia,
TBerk

Follow-Ups:
- Floppy flange was: Flange cap seals
  - From: peter@thescirocco.com (peter)

References:
- Flange cap seals
  - From: raver@prodigy.net (DEMETRIS RAPTIS)

Prev by Date: 16V prop. valves
Next by Date: Engine problems...
Previous by thread: Flange cap seals
Next by thread: Floppy flange was: Flange cap seals
Index(es):
- Date
- Thread