Re: Setting Timing

["Dave Ewing" <rabbit16v@prodigy.net>]

Your timing values should be in the bentley or on your hood.  As far as
finding TDC, the easiest would be to use the timing cover marks but if you
want to be more accurate, then pull your #1 spark plug out and get it as
close to tdc as you can by using something to sense where the piston is at
(a
screw driver or something).  Check to see where the cam mark is to verify
your in the right area and mark it on the crank.  I don't believe there is
any other way unless you want to pull your flywheel and compare it to
another
(you may be able to compare it to another while on the car by using
distinguishing casting marks).  HTH!!

Dave


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org