2L 16v engine work ok with (base) CIS?

[area53 at validpath.com (Jeff Toomasson)]

Keep in mind - the ABA is only 10:1 whereas the PL is 10.5 and the 9A 10.8...

Another thing to note is that I'm pretty sure 16v knock boxes are different 
part #'s than their 8v counterparts. Not sure how that impacts your situation, 
but something to keep in mind...

G/L w/ it - JT

> On 10/8/07, Jeff Toomasson <area53@xxxxxxxxxxxxx> wrote:
>> @ Verboten: What did you do for knock sensing? That would be my main
>> concern installing a higher compression motor into a scirocco. But for
>> winter use, as in Mark's case, it may not be a problem.
>>
>> Either way - it can definitely be done in a month, Mark. It would
>> admittedly be easier if you had a '84+ fusebox, but it's definitely not
>> hard for someone w/ your skillz...
>>
>> JT
> 
> 
> Thanks for the reply guys...  I've run a high compression ABA without knock
> sensing without issues (premium fuel...).  I may graft in the knock sensing
> ignition, but leave the fueling stock CIS.
> 
> Great!  I'll start on the swap later today...
> 
> Later,
> 
> Mark.
> 75
> 82 - soon to be 16v
> 82 Caddy - mTDI swap in progress
> 91 Jetta Coupe