[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
16V question
I think it goes to the cold-start valve housing.
Peter-302.832.8989
http://thescirocco.com/
Please! Include the previous text in your reply...
-----Original Message-----
From: LEF [mailto:rocco16@sbcglobal.net]
Sent: Friday, July 07, 2006 8:05 AM
To: scirocco-l@scirocco.org
Subject: 16V question
The engine is back together (not fired up yet, small water leak to contend
with....), but I have a nagging question:
One the air-flow meter-to-the-throttle body main rubber air duct there is
a gang of three hoses coming off the front part; the first is a large (1")
going to the nearby air control valve on the intake; the third is a small
(3/8"), Tee'd connector going into the DS fender (charcoal canister?); and
the middle one is medium sized (1/2"), going to the front of the engine near
the oil cooler (at least that's where it's been for a long time).
It was not connected to anything when I took the head off, just
hanging...open...in the breeze! I thought I could find out where it is
supposed to be connected once everything was off/out....but there is nothing
in the engine bay that I can find that would be a connection for this hose.
I'm stumped.
Any of you owners of a stock 16V Scirocco know where this air hose is
supposed to connect??
Thanks in advance, guys.
Larry
sandiego16v
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l