[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Shine rear swaybar dimension & metallurgical advice needed+(ATTN: Ron P.

Subject: Shine rear swaybar dimension & metallurgical advice needed+(ATTN: Ron P.
From: rocco16 at sbcglobal.net (LEF)
Date: Wed Aug 9 06:52:54 2006
References: <016a01c6bb4a$43470660$0301a8c0@MAIN>

If you are lifting where you say you are, then the suspension doesn't enter into the equation.  You are seeing pure chassis stiffness.

larry
sandiego16v
  Yes, even with the shine bar off, jacked from one rear corner (at the axle beam mount point), lifts that entire end of the car.  I
  can't tell if its suspension or some fluke in body assembly,

Follow-Ups:
- Shine rear swaybar dimension & metallurgical advice needed
  - From: jdbubb at verizon.net (Dan Bubb)
- Shine rear swaybar dimension & metallurgical advice needed+(ATTN: Ron P.
  - From: dan.bubb at gmail.com (Dan Bubb)

References:
- Shine rear swaybar dimension & metallurgical advice needed +(ATTN: Ron P.
  - From: amalventano1 at tds.net (Allyn)

Prev by Date: Shine rear swaybar dimension & metallurgical advice needed+(ATTN: Ron P.
Next by Date: Shine rear swaybar dimension & metallurgical advice needed
Previous by thread: Shine rear swaybar dimension & metallurgical advice needed +(ATTN: Ron P.
Next by thread: Shine rear swaybar dimension & metallurgical advice needed
Index(es):
- Date
- Thread