[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

dipstick funnel

I s'pose.  The 3A would have a differently shaped oil pan, as the 80 is mounted longitudinally.  Perhaps this is why it is different...

David
> 
> From: Gordy Stedman <ydrogs@gmail.com>
> Date: 2005/09/21 Wed PM 10:14:34 EDT
> To: Rob <nettlesre@gmail.com>,  Scirocco-l@scirocco.org
> Subject: Re: dipstick funnel
> 
> Not to steal your post but I have a question along the same lines. On my 3A
> I installed an oil pan and pump from a 1.8L and noticed the length of the 3A
> dipstick was longer. Both motors have the same length from the block to the
> top of the dipstick tubes. I measured the distance of the 1.8L dipstick from
> the full line to the bottom of the plastic handle and used a hacksaw to make
> a line of the same length on the 2.0L dipstick. Sound logical?
> 
> On 9/21/05, Rob <nettlesre@gmail.com> wrote:
> >
> > Karl,
> > I have 3 I don't need send me your address and I'll mail you one.
> >
> > Rob
> >
> > On 9/21/05, silvius14@comcast.net <silvius14@comcast.net> wrote:
> > > Do all the Scirocco's use the plastic dipstick funnel? The 1982 that I
> > just bought doesn't have one. Does the funnel do anything?
> > >
> > > Karl
> >
> > --
> > Rob
> > www.geocities.com/p_phi_99 <http://www.geocities.com/p_phi_99>
> 
>  --
> Gordy
> MK1 x 3
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>