Lubricating your Shaft

[dan.bubb at gmail.com (Dan Bubb)]

"Sparingly" being the key word!
I'm not sure it makes a whole hill of beens what grease you use. Just
make sure you don't put so much on that it can fly off and get on the
clutch surface.
Very thin film
Dan

On 9/21/05, John Gates <gatesj@mailblocks.com> wrote:
> The CV grease I've seen around in FLAPS (blue stuff) is not nearly as
> high in Moly as the real stuff that you get with a new CV joint, a
> friend with a euro repair shop has tubes of it laying around that he
> hasn't used.  It's nasty black staining stuff.  I have used that on
> splines sparingly with no problem.  The Autozone stuff probably has
> enough moly in it anyway.
>
> John Gates
> --
> '97 Jetta GLX
> '85 Scirocco
>