Okay, so now...alignment specs?

[timjmcconnell at gmail.com (Tim McConnell)]

My toe was at 3.24? toe out. I'd shread tires in 5000 miles. The car
would randomly jerk at highway speeds. But for some reason - it turned
soooooo good like that. ****Yes - I did have a broken tie rod!

--Timbo

On 5/23/05, Ron Pieper <rapieper@yahoo.com> wrote:
> 
> What he said.  I used 0.25? toe out since I'm autocrossing.  Dartiness on the highway is evident
> but not unworkable at all.  So I'd go 0? toe or a tiny bit of toe in.
> 
> Cheapass Ron
> Whose DIY alignment helped him win his class Sunday.
> 
> --- Dan Bubb <jdbubb@ix.netcom.com> wrote:
> > 1 degree negative camber. a little bit better stick in the front without any
> > tire wear issues.
> > 0 toe. toe in only wears the tires, toe out makes the car "point" better but
> > makes it darty going down the highway.
> > so 0 toe for street use.
> > Caster is not adjustable. If it isn't relatively even side to side then
> > something is bent.
> > my .02
> > Dan
> >
> 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 


-- 
www.vintagewatercooleds.com/tech