Re: Notification: Message contained inappropriate language

["Dan Bubb" <jdbubb@ix.netcom.com>]

I dont' get it. I don't see any bad words at all in any of this thread.
I don't know if this is what you missed, but here is another try.


I was thinking in terms of terms of pistons taking up more "space" in the
combustion chamber to make higher compression, and the fact that that would
lower the cylinders' volume...thus the amount "displaced" on each
stroke..but I guess displacement isn't affected by that....
Another reason why I don't build motors....oops

OK, back to the original question:
Did you realize any "worthwhile" performance gains?

> -----Original Message-----
> From: Dan Bubb [mailto:jdbubb@ix.netcom.com]
> Sent: Friday, March 11, 2005 11:05 AM
> To: Jim Ruffi; scirocco-l@scirocco.org
> Subject: Re: $150 aba here in OH
>
>
> I'm sure you can buy pistons for the European only ABF (Techtonics
> 107.833 $625) that would have the
> correct piston dome, valve cutouts and piston pin height for an
> ABA block and rods.
>
> short block is generally the same. I have one in my car.
>
> Why would you loose displacement as a result of messing with compression??
> Displacement is simply a function of bore and stroke and number of
> cylinders.
> Dan
> >





_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l