[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Jacked up



500.72 is list price, if it helps...  I dunno, if it does not...  :-)

Davodd
> 
> From: JoshuaA.Conner@VerizonWireless.com
> Date: 2005/06/29 Wed AM 07:49:48 EDT
> To: scirocco16v@gmail.com
> CC: scirocco-l@scirocco.org
> Subject: RE: Jacked up
> 
> Where do you live Justin?  I live in Columbus Ohio and I have a practically
> brand new tank for sale.  It was obtained via the factory recall on my now
> R.I.P 16V.  I am not sure what the going rate for a near new tank is.
> 
> Joshua Conner 
> Supervisor 
> Business Support Center 
> 866-837-0022 ext 7001
> Fax 614-560-2511 
> 
> 
> 
> -----Original Message-----
> From: scirocco-l-bounces+joshuaa.conner=verizonwireless.com@scirocco.org
> [mailto:scirocco-l-bounces+joshuaa.conner=verizonwireless.com@scirocco.o
> rg]On Behalf Of Justin
> Sent: Tuesday, June 28, 2005 12:09 PM
> To: Rocco list
> Subject: Re: Jacked up
> 
> 
> My fueltank cracked this way this weekend :(  Now I'm scrounging to
> find a new/used tank whilst getting used to biking around.
> 
> On 6/28/05, Marc Getty <marc@getty.net> wrote:
> > 
> > The last time I jacked the car up by the rear axle beam it either cracked,
> > or more likely brought out an existing crack to the surface in my fuel
> tank
> > from the pressure put on the tank. I don't jack up from the axel beam
> > anymore.
> > 
> > Luckily the dealer did the recall and I dropped off the car with a
> terrible
> > fuel leak at the dealership on the evening of September 11, 2001. Walking
> 20
> > minutes home from the dealership smelling like gas on completely deserted
> > streets was a scary feeling.
> > 
> > -Marc
> > 
> > 
> > 
> > -----Original Message-----
> > From: scirocco-l-bounces+marc=getty.net@scirocco.org
> > [mailto:scirocco-l-bounces+marc=getty.net@scirocco.org] On Behalf Of Allyn
> > Sent: Tuesday, June 28, 2005 11:06 AM
> > To: Dan Bubb; Jacob Hawes; Scirocco-l@scirocco.org
> > Subject: Re: Jacked up
> > 
> > > At the rear I jack up the car by the rear axle beam (sacrileage, I
> > > know, but never had a problem!)
> > 
> > i do the same, and i've never had a problem either. the beam does bow
> > slightly, but always returns to normal. should work fine for everyone
> else,
> > since im lifting more weight than normal when i do this on the rieger
> (~100#
> > worth of rear wheel+rubber).
> > 
> > Al
> > 
> > 
> > 
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> > 
> > 
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> > 
> 
> 
> -- 
> Justin Tomlinson
> Jacksonville, FL
> '82 Scirocco 8v
> '88 Scirocco 16v
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> ___________________________________________________________________
> The information contained in this message and any attachment may be
> proprietary, confidential, and privileged or subject to the work
> product doctrine and thus protected from disclosure.  If the reader
> of this message is not the intended recipient, or an employee or
> agent responsible for delivering this message to the intended
> recipient, you are hereby notified that any dissemination,
> distribution or copying of this communication is strictly prohibited.
> If you have received this communication in error, please notify me
> immediately by replying to this message and deleting it and all
> copies and backups thereof.  Thank you.
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
> 

'83 GTI, Daily Driver...
'87 16V, parts car
'82 pickup, 2.0 16V, collecting dust...