[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
What is the trick to remove the bumper trim?
Actually, Foxx, on my 16v, the left overlaps the right on the rear. </nitpicker>
On 6/18/05, Foxx (in a box) <foxxinabox@wideopenwest.com> wrote:
> >What is the trick to remove the bumper trim piece with out damaging
> >?anything? This would be the trim piece that mounts to the body and
> >sits on top of the bumper. It is a two piece unit and covers the gap
> >between the body and the bumper.
>
> front or rear and mki or mkii? on the mkii's, it's as easy as sliding
> each hald towards the outside of the car. remove the right side first
> (as it overlaps the left, iirc). installation is opposite of removal. as
> for the front, you'll need to get under there and remove the screw in
> the middle, and the two screws holding tabs in on either side. after
> that you'll need to spread the clips on the trim apart enough to they
> release from the core support. should pop out after that.
>
> --
> /\_/\ Foxx (in a box)
> < o o > http://foxx.tripod.com
> \ /
> ?
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
--
Mike
'86 red 16v (Red 5)