Synchronicity sucks

[area53 at validpath.com (Jeff Toomasson)]

Dan - now that you're back from Cincy, are you gonna take us through your 
miraculous install completion and how you made out?

I haven't seen a rant from you yet and it was rumored that you made it to 
Wilmington), so cough it up - enquiring minds want to know!  :)

JT

> Well, if I have a clue at all you have an 02J tranny with cable shift. On
> the tranny end the cables terminate in rod ends. The end of the cable 
> itself looks like it's threaded but it's actually just serated. On the rod 
> end there is a sleeve that is spring loaded towards the end of the rod end.
>  If you pull this sleeve into the spring the female part of the rod end
> will  expand and can be moved in and out on the cable.
> So, it's a fairly simple matter to determine which cable does the lateral 
> movement and which does the fore-aft.
> Then just move the sleeve and move the cable in or out a few serations.
> Easier to just try one direction than to try and noodle out which way to 
> move it.
> Just make sure you mark the current position before you start ;^)
> Make any sense?
> Dan
> PS, I'm with you on the synchronicity!
>