Lower half 16v intake same; 1.8 & 2.0?

[amalventano1 at tds.net (Allyn)]

I dont believe the lower/upper runners match, but it doesnt take much to 
port match the smaller lower intake to the larger upper intake.
Actually, i'm not positive that the head mating end of the lower intake is 
the same... someone else would probably chime in on that one.
hth
Al

----- Original Message ----- 
From: "RICHARD F KELLNER" <rfkellner@snet.net>
To: "scirocco" <scirocco-l@scirocco.org>
Sent: Friday, July 22, 2005 10:06 AM
Subject: Lower half 16v intake same; 1.8 & 2.0?


>
> Is the lower half of a 16V intake (40mm runners) the same for a 1.8l head 
> and a 2.0l  (42mm runners) head?  I know they are the same at the end that 
> mates to the head however; are they the same on the end that mates to the 
> upper half of the intake?
>
> Thanks, Rick.
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>