Fuel Pump Tests

[amalventano1 at tds.net (Allyn)]

you're talking about the injector test, where each injector goes into its own tube.
i dont remember if bentley has one for the main pump.
Al
  ----- Original Message ----- 
  From: Matt Gregory 
  To: Allyn 
  Cc: Gordy Stedman ; Scirocco-l@scirocco.org 
  Sent: Tuesday, July 05, 2005 3:59 PM
  Subject: Re: Fuel Pump Tests


  You could probably also use this method Allyn suggested to test the flow of the pump.  I forget what the test is called, but it's the one where you run the pump for x seconds and measure how much fuel it pumped in that time.  I don't remember if this test is in the Scirocco Bentley or in the CIS Bentley.

  matt.


  On 7/5/05, Allyn <amalventano1@tds.net> wrote:
    i wouldnt chance it.
    i've tested them by running suction/discharge hoses to a gas can.
    be sure you secure it somehow, it likes to jump when you apply power.
    hth
    Al

    ----- Original Message -----
    From: "Gordy Stedman" < ydrogs@gmail.com>
    To: <Scirocco-l@scirocco.org>
    Sent: Tuesday, July 05, 2005 3:21 PM
    Subject: Fuel Pump Tests


    Is there a way to do any bench tests on a puel pump to see if it is
    working before installing into the car?  Will running the pump dry for
    a couple of seconds off a 12V source to hear if it still spins damage
    it?  TIA 

    --
    Gordy

    MK1 x 3

    _______________________________________________
    Scirocco-l mailing list
    Scirocco-l@scirocco.org
    http://neubayern.net/mailman/listinfo/scirocco-l



    _______________________________________________
    Scirocco-l mailing list
    Scirocco-l@scirocco.org
    http://neubayern.net/mailman/listinfo/scirocco-l