HELP(Proj Stalled): Mount Direction

[ats at longcoeur.com (Patrick Bureau)]

 A picture is worth a thousand words.

<http://ats.longcoeur.com/Technotes/enginemounts/P3090100.JPG>

ATS - Patrick Bureau - ats@longcoeur.com (new email address)
===========================================
1985 2L JH/3A+KS CIS Scirocco 102.5WHP/121Torque
http://ats.longcoeur.com/ (new web address - shorter to type)


-----Original Message-----
From: scirocco-l-bounces@scirocco.org
[mailto:scirocco-l-bounces@scirocco.org] On Behalf Of James S. Danda
Sent: Saturday, January 10, 2004 12:25 PM
To: scirocco-l@scirocco.org
Subject: HELP(Proj Stalled): Mount Direction

I'm replacing the engine  mounts on my '86 16v. I have the passenger mount
and bracket off. But in doing so I destroyed the old mount(the bolt was
fused to the inner sleeve of the old mount). So I don't have a reference as
to the correct orientation to press the new mount into the bracket.

If I'm lucky and someone has a picture, or directions for the proper
orientation, the could send me.
I was hoping to get this done today (beg, beg, beg....)

Thanks!
Jim
_______________________________________________
Scirocco-l mailing list
Scirocco-l@scirocco.org
http://neubayern.net/mailman/listinfo/scirocco-l