door lever issues (not long)

[jlagnese at massed.net (John Lagnese)]

There's 1 more screw at the front of the handle. Its under the trim piece.
----- Original Message -----
From: <SailingFC@aol.com>
To: <sad_rocc@yahoo.com>; <scirocco-l@scirocco.org>
Sent: Sunday, September 14, 2003 6:15 PM
Subject: Re: door lever issues (not long)


> NO, don't pry anything!  With the door open, there should be a phillips
head
> screw in the door edge that at the same height of the door handle.  It
holds
> the handle in the door.  Remove this screw.  Then push the door handle
forward
> (towards the hinge of the door), the handle should slide forward and
release
> itself from the sheetmetal.  That's what I can remember.  Good luck.
>
> -Dick-
> 78 Scirocco
> Original Owner
> http://members.aol.com/sailingfc/
>
>
> In a message dated 9/14/2003 3:08:32 PM Pacific Daylight Time,
> sad_rocc@yahoo.com writes:
>
> To remove the handle I just pry out that middle metal piece and there are
a
> couple screws to remove right?
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


#################################################################
#################################################################
#################################################################
#####
#####
#####
#################################################################
#################################################################
#################################################################