Vacuum Hose Question. Help please!

[jdbubb at ix.netcom.com (Dan Bubb)]

The abraded hose can be found on ETKA at Main group 1, subgroup 33,
illustration 45-00, item 24. Vacuum system, activated carbon filter system,
PN, 067 133 643.
I'm thinking that the part is the same for your car although your ETKA data
may be totally different.
The vacuum hose with the screw should be connected to your distributor
vacuum advance. It also connects to an emissions purge diaphragm that you
may not have. (that would be item 14 on the above ETKA screen)
HTH
Dan



----- Original Message -----
From: "Adam J Garside" <adam.garside@uk.ibm.com>
To: <scirocco-l@scirocco.org>
Sent: Monday, May 19, 2003 7:21 AM
Subject: Vacuum Hose Question. Help please!


> Hi everyone,
>
> Noticed a hissing under the bonnet this weekend, checked over some hoses
> and one had been rubbing on one of the brake linkages.
> I looked on ETKA, can't seem to match the shape of this hose to any in the
> catalogue though. Any Ideas??
> Theres photos of the hose and a couple of captures from ETKA.
> Also noticed a hose coming out of the throttle body with a screw in it
> (Blocking it up) is there any reason for this?
>
> http://www.villagephotos.com/pubbrowse.asp?selected=271502
>
> Cheers,
> Adam
> '92 Scala 1.8i
> '88 325i
> http://www.geocities.com/little_log
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l