[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
16v running on 3 cylinders
- Subject: 16v running on 3 cylinders
- From: juliemac57@hotmail.com (Julie Macfarlane)
- Date: Sat, 03 May 2003 01:42:48 +0000
Check the fuel flow to that cyl. It seems to be burning rich (black/sooty)
Julie Macfarlane
Menlo Park Research & Development
Internet Application Developer
www.menloparkrandd.com
www.montgomeryweb.org
Amsterdam NY
>From: "John Lagnese" <jlagnese@massed.net>
>To: "der flo" <derrickmd18@juno.com>
>CC: <scirocco-l@scirocco.org>
>Subject: Re: 16v running on 3 cylinders
>Date: Fri, 2 May 2003 21:30:44 -0400
>
>Compression test? It seems that you may burning some oil, weak rings.
>Sometimes running a hotter plug helps.
>----- Original Message -----
>From: "der flo" <derrickmd18@juno.com>
>To: <jlagnese@massed.net>
>Cc: <scirocco-l@scirocco.org>
>Sent: Friday, May 02, 2003 9:13 PM
>Subject: Re: 16v running on 3 cylinders
>
>
> > the plug is black. It never had a 02 sensor hooked up since I brought
>it
> > but it was running ok. I removed and reinstalled CIS-E. I never
>touched
> > anything that could mess with the mixture. I'm getting light light blue
> > smoke out the tail pipe when its warm or when I push on the gas.
> >
> >
> > On Fri, 2 May 2003 21:09:15 -0400 "John Lagnese" <jlagnese@massed.net>
> > writes:
> > > The coil is working if the other cylinders are firing. Do you have
> > > spark at
> > > #4? What does the plug look like?
> > > John
> > > ----- Original Message -----
> > > From: "der flo" <derrickmd18@juno.com>
> > > To: <scirocco-l@scirocco.org>
> > > Sent: Friday, May 02, 2003 9:00 PM
> > > Subject: 16v running on 3 cylinders
> > >
> > >
> > > > I have a 16v with a running problem. when I start it its idles
> > > rough.
> > > > when I adjust the idle screw it does nothing. I can adjust he
> > > screw all
> > > > the way out and in and it idles the same way. I when it warns up
> > > it runs
> > > > on 3 cylinders. #4 cylinder won't fire. I changed the spark
> > > plugs and
> > > > wires and still does the same thing. does anyone know what the
> > > problem
> > > > maybe. should I change the coil next?
> > > >
> > > > _______________________________________________
> > > > Scirocco-l mailing list
> > > > Scirocco-l@scirocco.org
> > > > http://neubayern.net/mailman/listinfo/scirocco-l
> > >
> > >
> > >
> >
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
>
>
>_______________________________________________
>Scirocco-l mailing list
>Scirocco-l@scirocco.org
>http://neubayern.net/mailman/listinfo/scirocco-l
_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail