How to pull the hub off the bearing?

[list@cemetery.homeunix.org (Andrew Basterfield)]

On Tue, 4 Mar 2003 16:51:11 -0800 (PST)
Patrick Bureau <txrocco@sbcglobal.net> wrote:

> hummm tobias last time bearings on my rocco's required
> to be changed and I am assuming your talking about the
> front ones, one required 18 tons of pressure, and the
> other 12 tons to "pop" them out.. 
> unless you change your bearings like every 3 months I
> doubt very much that a bearing puller will be able to
> produce this kind of ton/sq'in power.
> 
> who knows...

You don't need 18 tons...

Just a blowtorch, a freezer and a big hammer worked for me.

--Andrew