[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

digifant 1 fuel problem

This message is in MIME format.  Since your mail reader does not understand
this format, some or all of this message may not be legible.

----__JNP_000_7064.4844.160c
Content-Type: text/plain; charset=us-ascii  
Content-Transfer-Encoding: 7bit

I installed digifant 1 a while ago and I never hooked the 02 sensor up. I
hooked it up and now my car is running really lean. when I push on the
gas and let go it back fires as the rpm goes down. My 02 sensor gauge is
not cycling at all just stays on lean. its hooked up properly because I
checked it and has someone else check it. Can someone help me? I checked
my ohm range on the air temp sensor and its set at 565. What should it be
set at?
----__JNP_000_7064.4844.160c
Content-Type: text/html; charset=us-ascii  
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3Dcontent-type content=3Dtext/html;charset=3Diso-8859-1>
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR></HEAD>
<BODY bottomMargin=3D0 leftMargin=3D3 topMargin=3D0 rightMargin=3D3><SPAN=20
class=3Dposttext>I installed digifant 1 a while ago and I never hooked the =
02=20
sensor up. I hooked it up and now my car is running really lean. when I =
push on=20
the gas and let go it back fires as the rpm goes down. My 02 sensor gauge =
is not=20
cycling at all just stays on lean. its hooked up properly because I checked=
 it=20
and has someone else check it. Can someone help me? I checked my ohm range =
on=20
the air temp sensor and its set at 565. What should it be set=20
at?<BR></SPAN></BODY></HTML>

----__JNP_000_7064.4844.160c--