Where to get valve springs

[boisfort@myhome.net (Decker)]

Hi Kervin;
    I don't know where to get your valve springs but I'm running in my 1979
Scirocco with a 1986 Audi 1800 8 V hydraulic head engine with 10 to 1
compression into which I dropped in a 272 German hydraulic cam using the
stock springs. It really lit it up ( also Large throttle body and TT long
non cat down pipe and a two and a half exhaust system) it seems to be
perfectly happy going to 6 grand regularly with an occasional foray to 6500
RPM. It is really a  pretty awesome difference from the stock cam.
Brian Decker
----- Original Message -----
From: "Kervin" <kervinridgley@earthlink.net>
To: "List" <scirocco-l@scirocco.org>
Sent: Monday, April 07, 2003 8:04 PM
Subject: Where to get valve springs


> I need to get some valve springs in my head before I get a big cam.
> It's a 8v hydro head and I am more than likely going with a 268 cam.  I
> checked a few sites, but they were out of stock.  Anybody get springs
> lately?
> --
> Kervin
> 86 Scirocco 2.0 8v 4K+80% and lots of other numbers and letters
> 88 Gti 1.8 16v Not done and now it's winter :(
> 00 tt600
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l