8v Distributor woes...

[pbureau@attbi.com (pbureau@attbi.com)]

HUmm A little confused..

you have a distributor I Want?

all I need is the JH with the 3a gear on it to make this 
work. Knock box.. who needs a knock box.. this aint 
going to produce 11:1 compression all my data indicates 
9.4:1...am I wrong?

now you mentioned an adaptor plate? I am assuming this 
is an aftermarket parts, any idea who sells this?

GREG! Heeeeeeellllp!
--
====
ATS - Patrick Bureau
1985 8v Euro GTX 3A/JH Project
(show car)
1985 8v Euro GT Project (Daily Drive)
http://www.longcoeur.com/scirocco/
http://www.texassciroccoteam.org/
> There is a pin that holds the gear on.  Drive the pin out of both, swap
> gears and use the JH distributor.  If you are going to use a knock
> sensor, I think you have to use something other than the vacuum advance
> type.  I have the distributor that you need sitting here, cause I got
> another one to use with my knock sensor.  *important*  Put the adapter
> ring on your JH distributor before you put the bigger gear on.  The gear
> is too big to fit through the hole in the ring.  
> 
> pbureau@attbi.com wrote:
> > 
> > okay started getting organized to do my hybrid 3a/jh
> > engine, and I am looking at the 3a distributor and I was
> > told to keep CIS I needed to transfer the gear from teh
> > 3s distro to the JH distro... can anyone advise me how
> > do you get that gear off the shaft?
> > 
> > no I cannot use the 3a distro, top parrt of it was
> > damaged from yard hacking (someone tried to pull the
> > distro off the head without proper tools)
> > 
> > --
> > ====
> > ATS - Patrick Bureau
> > 1985 8v Euro GTX 3A/JH Project
> > (show car)
> > 1985 8v Euro GT Project (Daily Drive)
> > http://www.longcoeur.com/scirocco/
> > http://www.texassciroccoteam.org/
> > 
> > _______________________________________________
> > Scirocco-l mailing list
> > Scirocco-l@scirocco.org
> > http://neubayern.net/mailman/listinfo/scirocco-l
> 
> -- 
> Kervin
> 86 Scirocco 2.0 8v 4K+80%
> 88 Gti 1.8 16v needs some love
> 00 tt600
>