idle actuator

[rapieper@yahoo.com (Ron Pieper)]

It's just to the right of the intake manifold (in the pic).

Verify that it's bad by pinching closed the big hose going into it.  If
the idle drops, good chance it's bad.  If not, look elsewhere.

FWIW, Ben Harder just fixed his high idle by fixing a vacuum leak in
the line that runs from the cold start valve to the breather on the
block.  We thought that was a bad ISV at first, too.

HTH

Ron


--- Hudin Lucian <lucian.hudin@transart.ro> wrote:
>  sorry for the lame question. Can someone point to me which is the
> idle actuator in a 16v engine for example in the pic
> http://www.scirocco16v.com/misc_gallery/0000024.jpg. My Scirocco
> idles
> around 1100-1200 RPM and I need to change it, so I've been told by
> some
> mechanics, everything they tried to bring it lower than that causes
> the
> engine not to idle, but to choke and die.
>  Thanks,
>  Luci
> 
> 
> 
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l


__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com