Ball joints

[LXVTEC@aol.com (LXVTEC@aol.com)]

Aaron,
I am getting ready to replace my bushings and balljoints as well. I decided 
just to get new control arms since I think one of mine might be bent. Potter 
has them in stock. I would go this route. the bushing is prepressed into the 
control arm and just get the control arm mounting kit and balljoints. 
HTH
Masun Dixon
78 Scirocco 16V
87 Scirocco 16V
P.S. You might as well replace the bushings since you have the control arms 
off and it will make it alot easier