1-3 gears I'm all over the place!

[LXVTEC@aol.com (LXVTEC@aol.com)]

Mark,
They don't use an intermediate shaft from an Accord unless it is an Accord 
tranny. I have done several Honda swaps. the Integra, Prelude, Accord motors 
all have intermediate shafts. they are stock from Honda. So unless you feel 
like making a casting or spending a lot of time on a lathe then have fun 
making an intermediate shaft. After you have one completed and can fit in it 
the tranny sealed has a bearing on the other end. the you have to figure out 
how to mount it to the block. after that you can probably use a drivers side 
on the passenger side into the intermediate shaft.
Masun Dixon
78 Scirocco 16V
87 Scirocco 16V