[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
A/C Survey
Check what the factory charge is with R-12 then reduce that amount by 10%
this is the amount of r134a that needs to be in the system. If that does not
help you my need to replace the receiver dryer and expansion valve. If your
high side pressure exceeds 200 psi then you will need to r&r the condensor.
HTH
----- Original Message -----
From: "Calimus" <calimus@techography.net>
To: "Scirocco ML" <scirocco-l@scirocco.org>
Sent: Monday, July 29, 2002 11:45 AM
Subject: A/C Survey
> OK, I know there has been some commenting about all this already, so if
> everyone wants to keep this off list, just e-mail me directly.
>
> I just converted my A/C over to r-134 and basicly is't cooler then the
> outside air, but it's nothing to write home about. I don't have a
> digital thermometer or anything to check whats coming out of the vents,
> but let's just say it's not enough for Ga heat. Now I only put 2 can's
> of coolent in the system and there are no leaks. Would another half a
> can or a whole 3rd can help make a difference?
>
> William
> --
> http://www.techography.com/scirocco (s.org forums)
>
> 88' Scirocco 16v (the void)
> 89' Cabriolet 8v (pretty bunneh)
> 71' Karmann Ghia (air sucker)
>
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>
- References:
- A/C Survey
- From: calimus@techography.net (Calimus)