[tech] 2.0l 8V swap - refresher

[scirocco@iglou.com (Gregory Davis)]

Here's info from my recent 3A swap:
http://3aswap.driversfound.com

I haven't done the knock sensor yet.  See TBerks thread in the vwvortex
hybrid forums (Thanks TBerk!)

HTH!

Greg :)
http://www.DriversFound.com
http://www.GAKMotorsports.com


On Mon, 22 Jul 2002 pellom@yorku.ca wrote:

>
> Hey guys,
>
> I need a refresher course on swapping a 2.0l 8V (Audi 3A block) into a Mk=
1 with
> a JH head and original wiring harness from a 1983 GTI.  My HD has been
> reformatted and I lost all the info I had pertaining to this swap.  Of co=
urse,
> any help is greatly appreciated.
>
> Here=92s what I require and please make any suggestions as to what I have
> forgotten.
>
> 1)=09intermediate shaft and distributor =96 I will be using the Audi stuf=
f.  I
> will be swapping out the guts from the 16V knock sensor and placing it in=
 the
> Audi distributor=85this is what my mech does for the swap supposedly.
>
> 2)=09oil pump and oil pan =96 I will be using the ones from a VW 8V.
>
> 3)=09installing the knock sensor =96 how many wires and which ones do I n=
eed
> to connect?  Do I also need the full throttle switch or can I use the swi=
tch
> presently installed on the JH motor.
>
> Is there anything that I have missed?  I think that that=92s all of the
> particulars which I need to complete the swap.
>
> Thanks for all the info guys=85
>
> Sal
> 67 Peugeot 404
> 81 Scirocco 16V
> 84 Vwabbit (2.0l 8V in progress)
> 84 Shitrocco
>
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l
>