Front stress bar opinions

[johnny.erk@sympatico.ca (John Erk)]

I guess this is an easy bar to install since it's adjustable unlike some
of the others(Autosport).How about the TT?
John

dale witt wrote:

>   I have run with the autotech sub frame for about five years.  I like
> it very much.  I had installed the 22mm front lower stress bar a year
> earlier.  After finding stress cracks in the frame, I repaired the
> cracks, installed the subframe and have not had problems since.  I
> believe it to be an important mod to any A1. Dale Witt82 2.1 16v
> Zender 400 w/NOS86 2.0 16v Daily driver85 1.8 GTI
>
>      ----- Original Message -----
>      From: Euroroc II
>      To: Scirocco-l@scirocco.org
>      Sent: Saturday, January 26, 2002 5:14 PM
>      Subject: Front stress bar opinions
>       So what's the overall opinion of the stock 16V lower stress
>      bar vs. and after market bar from Neuspeed or Autotech?
>      There are a lot of bends in the VW part so does this reduce
>      it's electivity? Anyone have an opinion on the Autotech
>      sub-frame as well? Thanks!-Raffi- '84 Scirocco R.I.P.- '87
>      Scirocco 16V flaatr = 'Fly Low And Avoid The Radar'(old
>      motto of mine recently resurrected)
>