What spoiler is this? | Where to get "scirocco" hatch glass graphic? | etc...

[amalventano1@home.com (Allyn)]

Fellow listers,
Check out these pics:
ftp://etka:etka@scirocco.dhs.org:69/kamei-1.JPG
This will show the 'straight' body, opposed to the 'nose bent' one from my
previous list post.
ftp://etka:etka@scirocco.dhs.org:69/kamei-2.JPG
This is showing the rear of the euro GTX. This car came from VW with the
kamei kit installed.
This is the look i plan to achieve with my project when it is complete. I
have most parts already.
Now for the questions:
1. What hatch spoiler is this?
2. Who has one/where do i get one???!!!
3. Where do i get the 'scirocco' letter stickers that are on the hatch
glass?
4. Whats with the "volkswagen" and "scirocco gtx" stickers (vs. plastic
badges), and where do i get them?
5. This is a stretch, but does anyone happen to have a cut-out rear euro
body piece (specifically the piece that goes across below the rear
lights/plate)? The one thats on the project is a bit mangled. A new piece
would make life easier, and if im gonna cut/weld a new one in i might as
well try to match the euro look. The difference between us and euro is that
us is widened at the top lip for the larger us plate.
Thanks for info in advance.
Al

Allyn Malventano, ETC(SS), USN
87 Rieger GTO Scirocco 16v (daily driver, 170k, rocco #6)
86 Kamei Twin 16V Turbo Scirocco GTX (shell donor ready to rock, still
planning)
87 Jetta 8v Wolfsburg 2dr (daily driver, 260k, 0 rattles, original clutch,
driveshafts, wheels :)