[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Header?

     I paid just over $100CDN (about $20US :)) for a PaceSetter header for my
8v, and it's working out fairly well.  I had to get a little creative for the
pipe from the header to the cat, but it's straight and only the pipe diameter
was a real issue.  I think the header pipe was 1 3/4 or 2 inches at the outflow
(I have a high flow cat and back, 2 1/4 inches, hence the creative piping).  If
it wasn't in a rather snowy driveway, I'd go measure it for you to be sure. 
Good luck.

Cheers,
Colin


On 03-Jan-02 JoshuaA.Conner@VerizonWireless.com wrote:
> I am unsure if my earlier post made it so here goes again...  Does any one
> have a fix to the dreaded exhaust leak at the flex joint?  I would like to
> keep the SS portion of the exh from after the cat back, so headers, down
> pipes are all things I am interested in.  Cheapa** Ron anything?  Please as
> many people share there results as possible.
> Joshua Conner
> Credit and Activations Representative
> Verizon Wireless
> Dublin, Ohio 43017
> Desk phone 614-560-2000 ext.6165
>  
> 
> _______________________________________________
> Scirocco-l mailing list
> Scirocco-l@scirocco.org
> http://neubayern.net/mailman/listinfo/scirocco-l