Is there a write-up for this? (was: 134a conversion update)

[Captnbr@aol.com (Captnbr@aol.com)]

There really is not much to write up on this.  The kit comes with the instructions.  You just screw in the new fittings over the old ones.  Then recharge it.  Pulling a vacumm is optional as you can see people who haven't pulled a vacumm have had good results.  Changing the dryer is easy,  Just lift up on the winscreen washer resevoir bottle and underneath it is the dryer, remove and replace.  I used all three cans that the kit came with.

I would also say if you have an R-12 system and your blowing cold, don't do the conversion.  Only do it if your system is empty.

Brian 86 16v
98 Jetta Vr6 GLX