update cam install

[rapieper@yahoo.com ('Cheapass' Ron Pieper)]

Check that your tensioner isn't rotated in the wrong direction to apply
the tension - it'll rub on the t-belt cover if it's wrong.  Ask me how
I know.  

Ron

--- Scirocco-Al <scirocco-Al@insight.rr.com> wrote:
> Doesn't sound good.  Lets hope that the screech came from something
> rubbing
> other than the metal of the cam and the cylinder head bearing
> surface....
>   ----- Original Message -----
>   From: Shayrock@aol.com
>   To: scirocco-l@scirocco.org
>   Sent: Thursday, August 08, 2002 7:58 PM
>   Subject: update cam install
> 
> 
>   I have given up temporarily on my euro cam install.  The bearing
> cap nut
> that i stripprd will not be in until monday. I decided to keep the
> old cam
> in until then and i replaced the nut with a stainless one from the
> hardware
> store.  Thinking this may get me through the weekend I put it all
> back
> together.  When I attempted to start the car it took a few cranks
> before it
> fired.  When it finally did it sputtered and almost idled, but it
> made a
> wierd whistling screach.
>         please tell me I didn't royally screw something up.
> 
>         all timing marks seem to be aligned properly (seem), firing
> order
> OK,hoses,wires,etc are attached.
> 
>   any help will be greatly appreciated
> 
>   thanks I'm off to the bar now          Confused in CT.
> 
> 
> 


__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com