Re: quick clutch q.

[thescirocco@juno.com]

On Thu, 13 Sep 2001 19:50:24 -0700 "Joe Doty" <rocco2nr@hotmail.com>
writes:
> is a thrust plate for an early smaller diameter clutch (200mm?) the 
> same size as one for a later one?
> 
> i.e. will one for a stock 81 scirocco S fit a 16v pressure plate?
> 
> that is all.
> 
> thanks
> Joe

The later 190mm thrust plates will work, BUT a new one only costs $10...

I guess it was the thrust plate...

Inspect the clutch pushrod too, if it machined a hole in the thrust
plate, you'll probably need to replace it also..

HTH!!!

Peter - http://thescirocco.com - Discount Techtonics, Autotech-Quaife
USA, Ronal, Motorworks, Magnecor & Peloquin Dealer -  Bear, DE 19701     
             
'79 Scirocco 16V "Retro"    
'83 GTI "Caged Rabbit"
'84.5 Scirocco "Oddball"
'84 GTI  - SciRollers: '79 White, '84 Black, '88 Red -
http://www.neojedi.com/feedbyte/topTen.php


________________________DO NOT!!!_______________________________

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org