RE: R/C suggestion

["Patrick Bureau" <pbureau@home.com>]

 he .. he he .. hehehe, you said vaselyne.


Patrick

> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of Julie
> Macfarlane
> Sent: Thursday, October 04, 2001 7:57 PM
> To: LEF@chem-tronics.com; scirocco-l@scirocco.org
> Subject: RE: R/C suggestion
>
>
> Of course you would need a release agent.
> Vasealine?
>
> >>THOUGHT FOR THE DAY:
> Never be afraid to try something new.
> Remember that amateurs built the ark. . . . .
> Professionals built the Titanic.
>
> Julie Macfarlane
> (Web Developer)
> Albany NY
> '81 8v-FF (FronkenMom)
> '81 16v-2Y (FronkenDad)
> ICQ: 7704980
> http://216.153.141.3/scirocco/
>
>
>
> >From: "Fry, Larry" <LEF@chem-tronics.com>
> >To: Julie Macfarlane <juliemac57@hotmail.com>,
> scirocco-l@scirocco.org
> >Subject: RE: R/C suggestion
> >Date: Thu, 4 Oct 2001 14:09:00 -0700
> >
> >Julie-
> >   A great idea until you try to remove the master from the
> >plaster....other
> >than that (and there ARE ways around it, but it does
> get complicated), it
> >would be very do-able.   It only depends on how much
> effort ($) we are
> >willing to expend.
> >
> >Larry  sandiego16V
> >
> >-----Original Message-----
> >From: Julie Macfarlane [mailto:juliemac57@hotmail.com]
> >Sent: Thursday, October 04, 2001 11:02 AM
> >To: scirocco-l@scirocco.org
> >Subject: RE: R/C suggestion
> >
> >
> >If a positive master were built with some attention to
> detail any exterior
> >detail would be on the inside during a vacu-form process.
> >
> >Make the master, then create a negitive mold from
> plaster. If resistive
> >wire
> >
> >from a coffee heater was added to the plaster and used
> to heat the mold,
> >air
> >
> >pressure added to the outside of the mold (or negitive
> air pressure through
> >very fine holes in the mold) would cause the heated ABS
> or PVC to collape
> >with in the mold. The details would be then on the
> outside of the model car
> >body..
> >A shop vac could supply both intake & exhaust pressures
> needed...
> >
> >I'd say it was my 2 cents worth , but I am broke this week.....
> >
> > >>THOUGHT FOR THE DAY:
> >Never be afraid to try something new.
> >Remember that amateurs built the ark. . . . .
> >Professionals built the Titanic.
> >
> >Julie Macfarlane
> >(Web Developer)
> >Albany NY
> >'81 8v-FF (FronkenMom)
> >'81 16v-2Y (FronkenDad)
> >ICQ: 7704980
> >http://216.153.141.3/scirocco/
> >
> >
> >________________________________________________________
> _________
> >Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp
>
>
>--
>Email LIST problems to: scirocco-l-probs@scirocco.org.
>To unsubscibe send "unsubscribe scirocco-l" in the message to
>majordomo@scirocco.org
>
>[Disclaimer]This e-mail is strictly confidential and intended
solely for
>the
>addressee. It may contain information which is covered by legal,
>professional, or other privilege. If you are not the intended
addressee you
>must not use, disclose, or copy this transmission. This E-mail is
not
>intended to impose nor shall it be construed as imposing any
legally
>binding
>obligation upon GKN Aerospace Chem-tronics Inc. and/or any of its
>subsidiaries or associated companies. Neither GKN Aerospace
Chem-tronics
>Inc. nor any of its subsidiaries or associated companies gives any
>representation or warranty as to the accuracy or completeness of
the
>contents of this E-mail. GKN Aerospace Chem-tronics Inc. shall not
be held
>liable to any person resulting from the use of any information
contained in
>this E-mail and shall not be liable to any person who acts or
omits to do
>anything in reliance upon it.
>
>
>--
>Email LIST problems to: scirocco-l-probs@scirocco.org.
>To unsubscibe send "unsubscribe scirocco-l" in the message to
>majordomo@scirocco.org
>


_________________________________________________________________
Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org



--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org