Re: 1/18 scale prototype R/C body

["Daniel Brideau" <dan@hobbyetc.com>]

Thanks,

It turns out, the blisters are caused by water droplets bursting into steam.

Dan Brideau


----- Original Message ----- 
From: "Fry, Larry" <LEF@chem-tronics.com>
To: "Daniel Brideau" <dan@hobbyetc.com>
Sent: Tuesday, November 13, 2001 8:54 AM
Subject: RE: 1/18 scale prototype R/C body


> Dan-
>   Your works interests me.  the blisters may be the result of overheating
> the polyc.
> 
> Larry  sandiego16V
> 
> -----Original Message-----
> From: Daniel Brideau [mailto:dan@hobbyetc.com]
> Sent: Saturday, November 10, 2001 9:57 PM
> To: Scirocco-l@scirocco.org
> Subject: 1/18 scale prototype R/C body
> 
> 
> Hi,
> 
> I have been working on a vacuum forming project in my free time.
> 
> http://www.liquidrc.com
> 
> The molds are still pretty rough, and it will be a week or three before
> I'm satisfied with the results.  
> 
> I'm getting small blisters in the surface of the polycarbonate, and the
> details of the molds needs a lot more work.  With luck, I'll have these
> details figured out shortly.
> 
> Let me know what you think,
> 
> Dan Brideau
> 
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to
> majordomo@scirocco.org
> 
> 
> [Disclaimer]This e-mail is strictly confidential and intended solely for the
> addressee. It may contain information which is covered by legal,
> professional, or other privilege. If you are not the intended addressee you
> must not use, disclose, or copy this transmission. This E-mail is not
> intended to impose nor shall it be construed as imposing any legally binding
> obligation upon GKN Aerospace Chem-tronics Inc. and/or any of its
> subsidiaries or associated companies. Neither GKN Aerospace Chem-tronics
> Inc. nor any of its subsidiaries or associated companies gives any
> representation or warranty as to the accuracy or completeness of the
> contents of this E-mail. GKN Aerospace Chem-tronics Inc. shall not be held
> liable to any person resulting from the use of any information contained in
> this E-mail and shall not be liable to any person who acts or omits to do
> anything in reliance upon it.
> 
> 


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org