RE: rotor didnt fix it, still no spark

["Patrick Bureau" <pbureau@home.com>]

when cranking engine, check if there is a spark at the coil wire at the
distributor cap if not then check if there is a spark at the coil connection
could be as simple as a bad coil wire.

Patrick


-----Original Message-----
From: owner-scirocco-l@scirocco.org
[mailto:owner-scirocco-l@scirocco.org]On Behalf Of Dan Miller
Sent: Sunday, November 04, 2001 5:35 PM
To: scirocco-l@scirocco.org
Subject: rotor didnt fix it, still no spark


i replaced the rotor, and the engine still gets no spark.  The only thing
else that i havn't tested/replaced are

1) Ignition Control Module
2) Knock Sensor


i did get 1 good spark off of the #1 plug when my buddy first cranked it,
then there was nothing.  Previous attempts have yielded the same results ith
just 1 or 2 sparks at teh beginning of the cranking.  any ideas?

Dan miller

_____________________________________________________________
Sign up for FREE email yourname@veedub.com
from http://www.veedub.com

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to
majordomo@scirocco.org


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org