Re: [ELEC]- Anti-knock set up in hand, now what?

[T Berk <tberk@mindspring.com>]

At 1:00 AM -0400 6/6/01, Cmr446@cs.com wrote:
>   After finding the only remaining complete anti-knock setup in an Audi 4K,
>the knock box (smaller of two black boxes w/ vac line, right?), distr.,
>sensor, ign. module, and all the wiring connecting it all together from the
>engine bay to the boxes, I have a few questions.
>   Will I need the other ECM, the larger of the two black boxes for this to
>run right? Do I need ALL the sensor leads for this (water temp, CIS-E
>hook-ups, air bypass control) or can I run this seperate of the engine's
>electronics (alt, temp sensors, fuel regulator, on one side; AK box, distr.,
>throt. switches, knock sens., and coil, on other side)?
>   Plan on installing into the 77 rocco. May go into Fox depending on what I
>find out for that.
>
>Thanks!
>Carl
>77rocco (you want to put what? where??)
>89fox


Not sure of the details but maybe this will help;

<http://www.volkswagen.org>

Click on the engine swaps link on the left, scroll down to the KS pic,

TBerk

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org