Re: [16v] clutch slips when warm (fwd)

[T Berk <tberk@mindspring.com>]

"T. Reed" wrote:
> 
> (from below)
> > PS could you forward this to the list?  My email system won't allow me
> > to reply to all, something about HTML.
> 
> Here's the message..
> 
> -Toby
> 
> ---------- Forwarded message ----------
> Date: Wed, 25 Jul 2001 07:06:46 -0700
> From: "Fry, Larry" <LEF@chem-tronics.com>
> To: T. Reed <treed2@u.washington.edu>
> Subject: RE: [16v] clutch slips when warm
> 
> Toby-
<snip>
> Special tools?
> BENTLY manual,  an absolute necessity
<snip>
> 30mm, six-point socket, *" drive, for the hub nuts
> 10mm, 12 point driver (NOT a socket, similar to a Torx driver)

Hex?

> 9mm, 12 point socket, for the pressure plate bolts

This is for the FLYWHEEL.     :)

> jack stands, two each.  Use 'em.

<snip>

>  Plus, the cleaner  you keep your HANDS, the better.  
> And clean parts = clean hands/tools  = clean parts.  
> Get it?  Which reminds me;  Do I give the impression 
> that things must be clean?  Good.    

Get some Nitrite 'surgical' gloves, a whole box full (100 count) and
change them often.

<snip>
> 
> LARRY E. FRY ('87 16V, '81 S)

Good stuff, 
Larry seems to be running Outlook <we morn for thee>.
TBerk

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org