Re: [tech]fuel pump relay - Mk1 16V

[Jim Jarrett <jarrett@rpa.net>]

At 1:57 PM -0400 7/17/01, pellom@yorku.ca wrote:
>
>So now what do I do....I presently have a 16V in a Mk1 rocco with the 16V
>wiring spliced into the Mk1 wiring harness.  Do I replace the relay or will I
>be experiencing similar problems?  Is there a different relay to be used?
>Should I simply wire in a jumper wire with a cutoff switch?  Any suggestions
>would be greatly appreciated.  TIA
>


Sal,

Do you have the extension harness for the relay, or is it plugged 
directly into the fuse box?

There was a recall item apparently for early mk1's to move the FPR 
off the fusebox and into an extension harness.

If you don't have it, get one, and I can dig up how to wire it.


/===============================================================\
| Jim Jarrett,Rochester NY      '93 Passat GLX, '84 Scirocco    |
| mailto:jarrett@rpa.net         '81 Rabbit Convertible 16v     |
|                                                               |
|    Any problem can be solved with the proper application of   |
|   Force, Heat, Chemicals, or Money.                           |
\===============================================================/



--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org