Re: Tech [oil pan removal on car]

[T Berk <tberk@mindspring.com>]

Re two small 10 mm next to transaxle-

You should source a thin wall 'wobble' extension for the end of your
ratchet. It is a couple of U-joints with a 10 mm socket on the end. Some
are made kinda clunky so beware, in such a small space you will need
lots of room, being so close to the oil pan wall.

Because the bolts are hard to thread in straight be careful not to cross
thread them. Starting by hand is preferable.

hth,
TBerk

btw- Ask Doug Teulie about this, (oops, not actively on list), Ask
ShawnM.  8])

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org