[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tech [oil pan removal on car]



hello folks, i've been off the list for over a year,
anyway . . . 

about a month ago I finished swapping in a JH
longblock and and a FF tranny into Kristen's '78. It
runs great but the oil pan gasket was leaking. I've
never needed to replace one with the motor on the car.
I was concerned about the two bolds next to the trans,
but folks assured me it was no big deal.

It certainly was a PITA! With a 1/4" drive extender I
was able to get the two bolts in question out (along
with the rest). They were loose anyway. Off came the
old cork and I was now ready to install the new rubber
and metal gasket (courtesy of Adirondack). I was able
to get both of those bolts threaded, but only one of
them tightened.

Anybody have any tips to as to a good tool to tighten
this sucker?

No leaks so far . . .

I think I'll replace this gasket on any future used
motors before installation (duh?)

thanks!





=====
Mark Peele
1982 Scirocco, 1981 Scirocco, 1978 Scirocco, 1987 Golf GT
http://www.scirocco2.de/mark.htm
Direct Mail: SCIROCCO_GTX@YAHOO.COM
For Sale: Various VW 13" Steel Wheels - free - you haul.
Need parts? try http://www.parts4vws.com/ (Potterman)
or http://www.germanautoparts.com/ (Adirondack)

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org