Re: chassis stiffening: Here's a link of 1st hand experience

["Allyn" <amalventano1@home.com>]

whats this por15 stuff?
is it clear, colored? shiny, dull?
where do we get it, and how good it is?
al

Allyn Malventano, ET1(SS), USN
87 rocco 16v (rieger gto - green - 'der rocco' - restoration complete)
87 jetta 8v wolfsburg 2dr (260k, still tight :)


----- Original Message -----
From: "Gary Huff" <scirocco86@home.com>
To: "Scott Williams" <scwillia@genuity.com>
Cc: <scirocco-l@scirocco.org>
Sent: Monday, July 02, 2001 11:22 AM
Subject: Re: chassis stiffening: Here's a link of 1st hand experience


> How about coming up with ways to seal the metal so that moisture can not break through? I'd say
it's worth it since the A1 chassis needs any amount of re-enforcement/stiffness it can get. Aside
from por-15(the only thing I can think off...)are there any ways of sealing the metal/paint? BTW, by
purchasing a spray wand from eastwood(body/paint supply comp.) and with an air compresor & patience
you could get por-15 inside of the rockers... this is what im doing to my 75 so it doesn't rot from
the inside out in a few years....... I think the gain is worth the cost, and rust prevention inside
of the rockers isn't necessarily a bad thing on these cars -- the 80 parts car in my driveway sure
could have used it, the rockers are turning into peanut brittle :) What do you all think? Peace,
> -Gary Huff
>
> On Mon, Jul 02, 2001 at 09:39:15AM -0400, Scott Williams wrote:
> > Yeah, what I'm hearing is that the stuff really works to stiffen the
> > chassis. However, the stories about it promoting rust are too prevalent to
> > ignore. I wonder if there are any spots in the A1 chassis that are not so
> > rust prone. -but would these spots offer any stiffening is another question.
> >
> > Damn.
> >
> > > -----Original Message-----
> > > From: Craig Williams [mailto:roccolister@hotmail.com]
> > > Sent: Saturday, June 30, 2001 1:50 PM
> > > To: Scott Williams; Scirocco List
> > > Subject: Was: chassis stiffening: Here's a link of 1st hand experience
> > >
> > >
> > > Hey all,
> > >
> > > Here's a link to a site of a guy that I know who did this with his RX-7 a
> > > couple of years ago. Check it out...
> > >
> > > http://www.geocities.com/dorifto/urethane.html
> > >
> > > -- --Craig Williams
> > > 1981 Scirocco S 2008cc 16V (As seen in 01-2001 Sport Compact Car)
> > > 1991 Passat Wagon 2.0 16V (For the Wife & baby)
> > > 2000 Saab Viggen (20 psi, Turbo charged monster)
> > > Northern California, USA
> > ______________________________
> > Scott F. Williams
> > Account Manager
> > GENUiTY - Eastern Region
> > 100 Wall Street, 10th Floor
> > New York, NY 10005
> > Voice: 212.416.1745
> > Cell: 917.648.2256
> > Fax: 212.618.5160
> > scott.williams@genuity.com
> >
> >
> > --
> > Email LIST problems to: scirocco-l-probs@scirocco.org.
> > To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
> >
>
> --
> Email LIST problems to: scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>


--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org