Re: 2.0 vs 1.8 16V head on a 9A Block.

[josh Wyte <josh_wyte@yahoo.com>]

Seems like all the "worked" 2 liter 16v's I've seen
(cams, p&p'd head, 50mm intake, exhaust etc) have put
down somewhere between 142 and 148hp to the wheels on
a dynojet.  Not sure on the torque.  Several stock 1.8
16v's have dynoed at low 100's in hp to the wheels at
the dyno near my house...

-josh


--- UrGTI@aol.com wrote:
> I can have a guy scan it and send it when I see him
> next, probably on the 
> weekend.
> 
> The problem is the guy running the dyno only started
> my chart at 4000 and ran 
> it up to 7000. At 4000 I had 130 lbs and 99 HP from
> there the torque drops 
> slowly and the HP raises.
> Not the best chart but you can learn a little I
> suppose.
> 
> Jasin
> 
> --
> Email LIST problems to:
> scirocco-l-probs@scirocco.org.
> To unsubscibe send "unsubscribe scirocco-l" in the
> message to majordomo@scirocco.org
> 


=====
Josh Wyte 
Momentum Motorsports
508-833-3024 After 5 pm EST

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

--
Email LIST problems to: scirocco-l-probs@scirocco.org.
To unsubscibe send "unsubscribe scirocco-l" in the message to majordomo@scirocco.org