RE: Passenger-side motor mount replacement (16v)

["Neal Tovsen" <sixteen.volt@gte.net>]

Make DAMN SURE they press it in right-ways-up!! In my case, the VW dealer
didn't even do it right. They fixed it, but what a PITA!

Neal
88 16v

> -----Original Message-----
> From: owner-scirocco-l@scirocco.org
> [mailto:owner-scirocco-l@scirocco.org]On Behalf Of Vaughn8v@aol.com
> Sent: Monday, January 17, 2000 5:11 PM
> To: scirocco-l@scirocco.org
> Subject: Passenger-side motor mount replacement (16v)
>
>
> Well, I am at the point where I need to take a trip to the
> machine shop to
> have the new mount pressed in...  geez, what a bitch of a job!!  I had to
> remove ALL the drive belt pulleys  (the water pump pulley was
> especially fun)
> so that I could remove the lower timing belt cover as I am going
> to replace
> the timing belt as well while I am in there.  Removal of the
> mount bracket
> was no sweat though... after I unbolted it and jacked the motor up it
> practically fell out!  Anyway, hopefully putting everything back together
> will go much more smoothly...  thanks to all for your help.
>
> Ben
> 88 16v Scirocco
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org