Re: Passenger-side motor mount replacement (16v)

["Jason" <jason87vw@nac.net>]

I hope someone mentioned a tensioner to you, if yours kinda squealed, you
should replace that also...While your there....

----- Original Message -----
From: <Vaughn8v@aol.com>
To: <scirocco-l@scirocco.org>
Sent: Monday, January 17, 2000 6:10 PM
Subject: Passenger-side motor mount replacement (16v)


> Well, I am at the point where I need to take a trip to the machine shop to
> have the new mount pressed in...  geez, what a bitch of a job!!  I had to
> remove ALL the drive belt pulleys  (the water pump pulley was especially
fun)
> so that I could remove the lower timing belt cover as I am going to
replace
> the timing belt as well while I am in there.  Removal of the mount bracket
> was no sweat though... after I unbolted it and jacked the motor up it
> practically fell out!  Anyway, hopefully putting everything back together
> will go much more smoothly...  thanks to all for your help.
>
> Ben
> 88 16v Scirocco
>
> --
> Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
> "unsubscribe scirocco-l" in the message to majordomo@scirocco.org
>


--
Email problems to: scirocco-l-probs@scirocco.org  To unsubscibe send
"unsubscribe scirocco-l" in the message to majordomo@scirocco.org