[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [tech] front suspension help
- Subject: Re: [tech] front suspension help
- From: Rich Deede----TOOL FAN <rdeed@udel.edu>
- Date: Thu, 17 Sep 1998 14:03:50 -0400 (EDT)
Maybe it's you heat shields right behind the rotors, mine use to make a
rattling noise.
HTH,
Rich
- ----------------------------------------------------------------------------
"Do you know why it's called the American Dream?........Because you have
to be asleep to believe it."-George Carlin
Rich Deede
University of Delaware(Comm. major)
1987 VW scirocco 16v
On Thu, 17 Sep 1998, faust wrote:
>
> Here is the problem; (88 16v)
>
> There is a loose, rattling noise, coming from the front right of the car.
> The noise goes away when accelerating or decelerating, but it very
> noticable when coasting, especially at low speeds. Making turns in either
> direction do not affect it. The noise sounds like a pencil being rattled
> around inside a glass bottled.
>
> I know that it is not the ball joint, I'm fairly certain that it is not
> the cv joint.
> It may be the wheel bearing, but as I said, it is a rattling noise, not a
> growling noise and making turns does not affect it.
>
> My Question:
>
> With the front jacked up, there is approximately 1/8" verticle play in the
> top of the strut (between the plastic spacer and the bearing plate that
> bolts to the chassis).
> Is this normal? It seems to be about the same as on the drivers side, and
> yet that side is not making any noise. When I move the strut up and down
> rapidly, the noise it makes seems similar to the one I'm trying to find.
> Is his it? Any pointers?
>
> Thanks in advance
>
> later,
> Greg Faust
>
> 85 Mazda RX7
> 86 Jetta Deluxe 2dr
> 87 GLi
> 88 Scirocco 16v (206k miles and counting)
>
> --
> To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
> with your request (subscribe, unsubscribe) in the BODY of the message.
>
- --
To subscribe or unsubscribe, send email to scirocco-L-request@scirocco.org,
with your request (subscribe, unsubscribe) in the BODY of the message.
------------------------------